| Designation | ISO VG | Note | Remarks |
|---|---|---|---|
| LFC 34068 | 68 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara etc. Machine oil manroland. Machine oil Komori. Chain oil Bobst. |
| LFC 34100 | 100 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara etc. Machine oil manroland 900. Machine oil KBA. Machine oil Metalprint. |
| LFC 34150 | 150 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara etc. Machine oil Heidelberger. |
| LFC 34220 | 220 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara etc. Machine oil Bobst. Chain oil Bobst Adhesive. |
Semi-synthetic Paraffin oils - Synthetic Gearbox Oils - Lubricating greases - General H1-Lubricating greases - Chain Lubricants - Pneumatic oils - Hydraulic oils - Oil for cylinder bearers - Gripper seats maintenance - Curves and eccentrics maintenance - Silicone-Spray/ Silicone-Oil - Corrosion protection and EP-grease-spray / Cleaning agents - Vacuum-pressure-pumps, blowers, compressors - Aerosol-Sprays
| Designation | ISO VG | Note | Remarks |
|---|---|---|---|
| LFC 3022 | 22 | Cleaning oil and Rinse oil | LFC 3022 application as Cleaning oil by manroland . Clean or rinse for aprox. 20 min without print job. |
| LFC 3068 | 68 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara... |
| LFC 3100 | 100 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara... |
| LFC 3150 | 150 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara... |
| LFC 3220 | 220 | Circulating and gearbox oils | Application in machines from Bobst, Heidelberger, KBA Planeta, manroland, Komori, Shinohara... |
| Designation | ISO VG | Remarks |
|---|---|---|
| LFC 9032 | 32 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9046 | 46 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9068 | 68 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9100 | 100 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9150 | 150 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9220 | 220 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. High-temp.-machine oil Bobst. |
| LFC 9320 | 320 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 9460 | 460 | PAO with application as HVI-oil (Hydraulic oil with high viscosity index) and as Circulation and gearbox oils in Bobst-Machines. |
| LFC 8150 | 150 | Polyglycol oils with application as Circulating oils and gearbox oils in Bobst-Machines. |
| LFC 8220 | 220 | Polyglycol oils with application as Circulating oils and gearbox oils in Bobst-Machines. |
| LFC 8320 | 320 | Polyglycol oils with application as Circulating oils and gearbox oils in Bobst-Machines. |
Lubricating greases for gripper shaft bearings.
| Designation | Note | Remarks |
|---|---|---|
| GLS 367/N2 | NLGI 1,2 | Lubricating grease for application in Machines from KBA Planeta, with no UV-stress. Can also be recommended as a general Lubricant. |
| GLS 964/N2 | (KP2K-20) | Thixotropic polyurea type grease for roller- and slide bearings. Under normal lubrication the thixotropic characteristics will minimize spin-off of the grease. GLS 964/N2 is particularly recommended for lubrication of gripper shafts. |
| VP 886 | NLGI 2 | The grease has been developed especially for the lubrication of gripper shafts under UV-influence. The grease has varnish dissolving properties. |
Attention:
During the relubrication of gripper shaft bearings it is absolutely neccesary to check the lubrication quantity. Normally this is approx. 0,6 to 0,7 grams for each bearing.
More grease means oversize-lubrication and the consequence of this will lead to grease splashes because of rotation/centrifugation.
| Designation | Note | Remarks |
|---|---|---|
| GLS 361/N1 | NLGI 1 | Manroland . Appropriate for lubricating toothed segments. Assembly grease specifically for the prevention of tribocorrosion/fretting corrosion. |
| GLS 363/N3 | (KP3K-20) | Grease for general lubrication of machines and open lubricating points. This grease is also suitable as sealing grease for ink ducts. |
| GLS 364 | NLGI 2 | H1-grease for high rotating bearings (Speedfactor >600.000). Denmark experience: This smooth grease is also suitable as sealing grease for ink ducts. |
| GLS 794/N2 | NLGI 2 | Highly medium-resistant silicone grease for the sealing of ink ducts on KBA Planeta printing presses. |
| GLS 964/N2 | (KP2K-20) | Thixotropic polyurea type grease for roller- and slide bearings. Under normal lubrication the thixotropic characteristics will minimize spin-off of the grease. GLS 964/N2 is particularly recommended for lubrication of gripper shafts. |
| GLS 967 | NLGI 1,2 | This very adhesive grease with an elevated base oil viscosity is suitable for badly sealed bearings, such as curved roller bearings. |
| VP 873 | NLGI 2 | High-load and adhesive grease for anti-friction bearings, plain bearings, and open lubricating points. Appropriate for lubricating toothed segments. |
| VP 890 | NLGI < 000 | This grease specially matches the requirements for Heidelberg printing machines. H1-special-semi-liquid grease with high corrosion protection. |
| Designation | Note | Remarks |
|---|---|---|
| LA 8 H1 | KBA Planeta No. L 082 0880 | Synthetic, viscous special lubricant for service of chains running under high load, curve discs, cams and open cog wheels. LA 8 H1 is the ideal H1-lubricant for delivery chains of sheet fed presses. More info: Basic properties comparable with LA8 standard. It is slightly more liquid to cope with solidification due to influence of printing spray powder. |
| FLC 8 H1 | Spray | Extreme adhesion and high resistance to centrifugation, highly loadable with good creeping abilities and anti-corrosion properties: FLC 8 is a special lubricant to operate chains under maximum load. |
| FLC 9010 | H1-oil spray | Synthetic oil spray for temperatures from -35°C up to +160°C. Suitable for minor to average UV-influence. |
| LFC 34068 | Bobst chain oil. Müller-Martini chain oil. Due to the very good wear protection values, these oils are suitable as chain lubrication of the Bobst machines. | |
| LFC 34100 | Due to the very good wear protection values, these oils are suitable as chain lubrication of the Bobst machines. | |
| LFC 34150 | Due to the very good wear protection values, these oils are suitable as chain lubrication of the Bobst machines. | |
| LFC 34220 | Bobst chain oil. Due to the very good wear protection values, these oils are suitable as chain lubrication of the Bobst machines. | |
| LFC 3460 | KBA H1 chain oil. Adhesive lubricant to grease delivery chains of KBA Planeta machines. These adhesive H1-chain oils are also available in different viscosity classes. (Denmark: KOMORI H1-chain oil). | |
| LFC 9220 | Bobst UV-chain oil. Synthetic oil to grease delivery chains of Bobst machines with High UV-radiation-stress. (Denmark: Bobst UV-and-high-temp-chain oil ). | |
| LFC 9460 | KBA UV-chain oil. Synthetic oil to grease delivery chains of KBA Planeta machines with High UV-radiation-stress. (Denmark: KOMORI UV-chain oil with H1). | |
| FLC 675 R+S | A cleaning agent containing non-chlorinated solvents for cleaning extremely fouled chains and machine parts. Leaves a thin adhesive, pressure and corrosion resistant film of lubricant to give protection until re-greasing. |
| Designation | ISO VG | Remarks |
|---|---|---|
| LFC 3022 | 22 | Pneumatic oil with high pressure resistance and load carrying abilities to reduce wear. Special anti-aging additives ensure long operating times and safety of operation. |
| LFC 3032 | 32 | Pneumatic oil with high pressure resistance and load carrying abilities to reduce wear. Special anti-aging additives ensure long operating times and safety of operation. |
| Designation | Note | Remarks |
|---|---|---|
| LFC 34068 | HLP 68 | Semi-synthetic HLP and CLP-oil with FE 9-extended-test-run at +40°C; extended oil change intervals are possible; special H1 oils with paramount anti-wear properties from +40°C onwards) |
| LFC 3032 | HLP 32 | Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 3046 | HLP 46 | POLAR hydraulic H1 oil. Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 3068 | HLP 68 | Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9032 | HLP 32 | High Temperature Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9046 | HLP 46 | High Temperature Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9068 | HLP 68 | High Temperature Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| Designation | Note | Remarks |
|---|---|---|
| LFC 34100 | This oil has been developed for the cylinder bearer lubrication. The product is made for high working pressure loads and offers good cleaning performances. Can be used with sheet fed and web presses. |
| Designation | Note | Remarks |
|---|---|---|
| FLC 3010 | This oil spray provides high class anti-wear and corrosion protection. It has superior creeping ability for joints and gaps. (Denmark: "Food"-Gleitspray) | |
| FLC 4010 | KBA Planeta No. L 082 0860 | Synthetic high-temperature spray employed in UV-lacquering environment. Best results where good anti-corrosion and anti-wear properties are mandatory. (Denmark: "High-Temp"-Gleitspray) |
| FLC 9010 | Synthetic oil spray forming a slightly thicker film than FLC 3010. The product is suitable for use under UV-radiation. Manroland UV-Gleitspray. (Denmark: "UV-Radiation"-Gleitspray). |
| Designation | Note | Remarks |
|---|---|---|
| FLC 8 H1 | Spray | Due to high adhesion properties and outstanding lubricating qualities it is in use with curves and eccentric devices, where no automatic greasing by means of an automatic central greasing unit is offered (vide LA 8 H1). KBA Planeta No. L 082 0880 supplied in aerosol spray. |
| Designation | Note | Remarks |
|---|---|---|
| FLC 745 | Spray | Polar-Mohr H1 silicone spray. Forms an almost invisible non moistering/non dirt accepting both high adhesive slide film of silicone lubricant on paper and cardboard. The layer protects against moisture. Short evaporation after spraying is advantageous. |
| LFC 7260 | (VP 705 earlier name) | Medium viscosity silicone lubricant that does not leave any stains. An even thinner version LFC 7038 (without H1 approval) is particularly recommended for the lubrication of the stitching wire. |
| Designation | Note | Remarks |
|---|---|---|
| MBF 370 | Conservation film easily applied with brush or rag. Prevents corrosion between printing plate and plate cylinder. MBF 370 can be removed with a carbon-dissolving agent or our FLC 900 Clean spray. | |
| FLC 900 Clean | Spray | The odurless cleaning spray has a high disolving ability and evaporates in a short time without leaving any residues. It is possible to remove oils, greases, waxes, anti-corrosion agents. Fresh paint residues and other soilings. |
PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C). These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers.
| Designation | ISO VG | Remarks |
|---|---|---|
| LFC 9046 | 46 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9068 | 68 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9100 | 100 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9150 | 150 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9220 | 220 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 9320 | 320 | High Temperature compressor oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| Designation | Note | Remarks |
|---|---|---|
| FLC 8 H1 | Extreme adhesion and high resistance to centrifugation, highly loadable with good creeping abilities and anti-corrosion properties: FLC 8 is a special lubricant to operate chains under maximum load. | |
| FLC 675 R+S | A cleaning agent containing non-chlorinated solvents for cleaning extremely fouled chains and machine parts. Leaves a thin adhesive, pressure and corrosion resistant film of lubricant to give protection until re-greasing. | |
| FLC 745 | Polar-Mohr H1 silicone spray. Forms an almost invisible non moistering/non dirt accepting both high adhesive slide film of silicone lubricant on paper and cardboard. The layer protects against moisture. Short evaporation after spraying is advantageous. | |
| FLC 900 Clean | The odurless cleaning spray has a high disolving ability and evaporates in a short time without leaving any residues. It is possible to remove oils, greases, waxes, anti-corrosion agents. Fresh paint residues and other soilings. | |
| FLC 3010 | This oil spray provides high class anti-wear and corrosion protection. It has superior creeping ability for joints and gaps. (Denmark: "Food"-Gleitspray) | |
| FLC 4010 | KBA Planeta No. L 082 0860 | Synthetic high-temperature spray employed in UV-lacquering environment. Best results where good anti-corrosion and anti-wear properties are mandatory. (Denmark: "High-Temp"-Gleitspray) |
| FLC 9010 | Synthetic oil spray forming a slightly thicker film than FLC 3010. The product is suitable for use under UV-radiation. Manroland UV-Gleitspray. (Denmark: "UV-Radiation"-Gleitspray). | |
| MBF 370 | Conservation film easily applied with brush or rag. Prevents corrosion between printing plate and plate cylinder. MBF 370 can be removed with a carbon-dissolving agent or our FLC 900 Clean spray. |
Above mentioned indications are given as per our best knowledge. This should serve for evaluation and advise only. A commitment and warranty can‘t be taken over due to manifold applications and use.