| Designation | for | ISO VG | Remarks |
|---|---|---|---|
| LA 1 | circulation oils manroland No. 80.94S40-0117 | 68 | concentrate to significantly increase working performance of commercially available mineral oils (to use as CLP gear oils, please consult us)- reduction of wear and temperatures- regular dosage 20 %- extreme dosage: pure when heavy duty operation is demanded |
| LA 7 | gear oils manroland No. 80.94S40-0128 | 320 | concentrate to significantly increase working performance of commercially available mineral oils (to use as CLP gear oils, please consult us)- reduction of wear and temperatures- regular dosage 20 %- extreme dosage: pure when heavy duty operation is demanded |
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 1005 | 5 | From -20°C / +80°C | Pneumatic oil. Rinse oil. |
| LFC 1010 4) | 10 | From -20°C / +80°C | Pneumatic oil. Rinse oil. |
| LFC 1015 4) | 15 | From -20°C / +100°C | Pneumatic oil. |
| LFC 1022 | 22 | From -15°C / +100°C | Pneumatic oil. Rinse oil. |
| LFC 1032 | 32 | From -15°C / +120°C | Pneumatic oil. Hydraulic oil. |
| LFC 1046 | 46 | From -15°C / +120°C | Hydraulic oil. Circulation oil. Gearbox oil. |
| LFC 1068 1) 2) | 68 | From -10°C / +120°C | Hydraulic oil. Circulation oil. Gearbox oil. Chain oil. |
| LFC 1100 1) 3) | 100 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 1150 1) | 150 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1220 | 220 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1320 | 320 | From -10°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 1460 | 460 | From -10°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 1680 | 680 | From -5°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 11000 | 1000 | From -5°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 11500 | 1500 | From -5°C / +120°C | Gearbox oil. Bearing lubrication oil. |
1) with FE 8 anti-wear test approval
2) long-life service oil manroland
3) long-life service oil KBA Planeta (indent-No. L 082 0639)
4) If technically possible, then replacement with LFC 1022 is recommended
Series LFC 1000 H or better named Series LFC 1000 HAFT. Mineral oil based adhesive oils with high protection against wear and corrosion, -best characteristics for work under high load, -long service times , -stays extremely clean-
These oils can be used as adhesive chain oils, or alternative the oils has often helped reducing an increased oil spill of older leaking machines. There is no guarantee, but this was often the proven results.
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 1046 Haft / LFC 1046 H | 46 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 1068 Haft / LFC 1068 H | 68 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 1100 Haft / LFC 1100 H | 100 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 1150 Haft / LFC 1150 H | 150 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1220 Haft / LFC 1220 H | 220 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1320 Haft / LFC 1320 H | 320 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1460 Haft / LFC 1460 H | 460 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 1680 Haft / LFC 1680 H | 680 | From -10°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 11000 Haft / LFC 11000 H | 1000 | From -10°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 11500 Haft / LFC 11500 H | 1500 | From -10°C / +120°C | Gearbox oil. Bearing lubrication oil. |
The German word "HAFT" means "adhesive". HAFT is shortned to the letter ''H''.
Series LFC 3000. Semi-synthetic Paraffin oils (CLP-oils; application without extended oil change intervals - this equals normal standard service intervals; oil change according to service manual)
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 3015 1) | 15 | From -20°C / +120°C | Pneumatic oil. Rinse oil. |
| LFC 3022 | 22 | From -20°C / +120°C | Pneumatic oil. Rinse oil. Hydraulic oil. Chain oil. |
| LFC 3032 | 32 | From -20°C / +120°C | Pneumatic oil. Hydraulic oil. Chain oil. |
| LFC 3046 | 46 | From -20°C / +120°C | Hydraulic oil. Circulation oil. Gearbox oil. Chain oil. |
| LFC 3068 | 68 | From -15°C / +120°C | Hydraulic oil. Circulation oil. Gearbox oil. Chain oil. |
| LFC 3100 | 100 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 3150 | 150 | From -15°C / +120°C | Gearbox oil. Chain oil. |
| LFC 3220 | 220 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 3320 | 320 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 3460 | 460 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 3680 | 680 | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 31150 | [~ 1150 ] | From -10°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
1) If technically possible, then replacement with LFC 3022 is recommended
Series LFC 4000. Fullsynthetic Ester based oils.
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 4032 | 32 | From -40°C / +130°C | Hydraulic oil. |
| LFC 4046 | 46 | From -40°C / +130°C | Hydraulic oil. Chain oil. Compressor oil. |
| LFC 4068 | 68 | From -35°C / +130°C | Hydraulic oil. Chain oil. Compressor oil. |
| LFC 4100 | 100 | From -35°C / +140°C | Circulation oil. Gearbox oil. Chain oil. Compressor oil. |
| LFC 4150 | 150 | From -35°C / +140°C | Circulation oil. Gearbox oil. Chain oil. Compressor oil. |
| LFC 4220 | 220 | From -35°C / +140°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
| LFC 4320 | 320 | From -35°C / +140°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
Series LFC 7000. Fullsynthetic Silicone oils.
| Designation | Viscosity @ +40°C | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 7038 | 38 | From -55°C / +140°C | Release agent, care product, anti-friction agent, hydraulic fluid |
| LFC 7075 | 75 | From -55°C / +150°C | Release agent, care product, anti-friction agent, hydraulic fluid |
| LFC 7260 (H1) | 262 | From -50°C / +150°C | Release agent, care product, anti-friction agent, hydraulic fluid |
| LFC 7370 | 374 | From -50°C / +150°C | Release agent, care product, anti-friction agent, hydraulic fluid |
| LFC 7750 | 750 | From -50°C / +150°C | Release agent, care product, anti-friction agent, hydraulic fluid |
Series LFC 8000. Fullsynthetic Poly glycol based oils.
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 8032 | 32 | From -20°C / +120°C | Hydraulic oil |
| LFC 8046 | 46 | From -20°C / +120°C | Hydraulic oil. |
| LFC 8068 | 68 | From -20°C / +120°C | Hydraulic oil. Circulation oil. |
| LFC 8100 | 100 | From -20°C / +120°C | Circulation oil. Gearbox oil. |
| LFC 8150 (H1) | 150 | From -20°C / +120°C | Circulation oil. Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 8220 (H1) | 220 | From -20°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 8320 (H1) | 320 | From -20°C / +120°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 8460 (H1) | 460 | From -20°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 8680 | 680 | From -20°C / +120°C | Gearbox oil. Bearing lubrication oil. |
| LFC 81000 | 1000 | From -20°C / +120°C | Gearbox oil. Bearing lubrication oil. |
Series LFC 9000. Fullsynthetic Poly-Alpha-Olefines based oils (with H1-approval)
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 9032 1) | 32 | From -45°C / +150°C | Hydraulic oil. Circulation oil. Compressor oil. |
| LFC 9046 | 46 | From -45°C / +150°C | Hydraulic oil. Circulation oil. Compressor oil. |
| LFC 9068 | 68 | From -40°C / +150°C | Circulation oil. Gearbox oil. Compressor oil. |
| LFC 9100 | 100 | From -40°C / +150°C | Circulation oil. Gearbox oil. Compressor oil. |
| LFC 9150 | 150 | From -40°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
| LFC 9220 | 220 | From -35°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
| LFC 9320 | 320 | From -35°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
| LFC 9460 | 460 | From -30°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. Compressor oil. |
| LFC 9680 | 680 | From -20°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
| LFC 91000 | 1000 | From -20°C / +150°C | Gearbox oil. Chain oil. Bearing lubrication oil. |
1) If technically possible, then replacement with LFC 9046 is recommended
Series LFC 34000. Semi-synthetic Paraffin oils (CLP-oils with FE 9-extended-test-run at +40°C; extended oil change intervals are possible; special gear oils with paramount anti-wear properties from +40°C onwards)
| Designation | ISO-VG | Temperatures (°C) | Remarks |
|---|---|---|---|
| LFC 34068 1) | 68 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 34100 1) | 100 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 34150 | 150 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 34220 | 220 | From -15°C / +120°C | Circulation oil. Gearbox oil. Chain oil. |
| LFC 34320 | 320 | From -10°C / +120°C | Gearbox oil. Chain oil. |
| LFC 34460 | 460 | From -10°C / +120°C | Gearbox oil. Chain oil. |
1) with FE 9-extended-test-run at +40°C.
| Designation | Note | Remarks |
|---|---|---|
| LA 8 | manroland No. 80.94S40-0119 Heidelberg No. 00.580.3275S | Synthetic, viscous special lubricant for service of chains running under high load, curve discs, cams and open cog wheels. LA 8 is the ideal lubricant for delivery chains of sheet fed presses. |
| LA 8P | Heidelberg No. 00.580.5591 KBA Planeta No. L 082 0888 | LA 8P based on LA 8 works in higher temperature areas and maintains a flat temperature diagram. |
| LA 8 H1 | (with H1-approval) KBA Planeta No. L 082 0880 | Basic properties comparable with LA8 / LA 8P. It is slightly more liquid to cope with solidification due to influence of printing spray powder. |
| FLC 8 | spray | Extreme adhesion and high resistance to centrifugation, highly loadable with good creeping abilities and anti-corrosion properties: FLC 8 is a special lubricant to operate chains under maximum load. |
| FLC 8 H1 | H1-spray | Extreme adhesion and high resistance to centrifugation, highly loadable with good creeping abilities and anti-corrosion properties: FLC 8 is a special lubricant to operate chains under maximum load. |
| FLC 1010 | spray manroland No. 80.94S40-0133 | Built up on our lubricating concentrate LA 1. Shows paramount creeping abilities and high loadability in joints and gaps. The utmost thin lubricating film significantly prevents the take up of dust and dirt. |
| FLC 1014 | oil-teflon spray | This spray has LA 1 as a base. The additive of PTFE reduces the friction resistance enormously. |
| FLC 1070 | spray | Base of this spray is the highly loadable lubricating concentrate LA 7. It forms a stronger lubricating film than those of FLC 1010 or FLC 1012. |
| FLC 9010 | H1-oil spray | Synthetic oil spray for temperatures from - 35°C up to + 160°C. Suitable for minor to average UV-influence. |
| LFC 1460H | (adhesive oil) KBA Planeta No. L 082 0971 | Mineral oil based, adhesive lubricant to grease delivery chains. H-oils (adhesive) are also available in different viscosity classes. |
| FLC 675 R+S | available in a liquid performance or as spray with H1-approval | A cleaning agent containing non-chlorinated solvents for cleaning extremely fouled chains and machine parts. Leaves a thin adhesive, pressure and corrosion resistant film of lubricant to give protection until re-greasing. |
| Designation | ISO-VG | Remarks |
|---|---|---|
| LFC 1010 | 10 | Pneumatic oils with high pressure resistance and load carrying abilities to reduce wear. Special anti-aging additives ensure long operating times and safety of operation. |
| LFC 1015 | 15 | Pneumatic oils with high pressure resistance and load carrying abilities to reduce wear. Special anti-aging additives ensure long operating times and safety of operation. |
| Designation | ISO-VG | Remarks |
|---|---|---|
| LFC 1032 | 32 | Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 1046 | 46 | Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| LFC 1068 | 68 | Hydraulic oils with high protection against wear and corrosion. Special anti-aging additives ensure long operating times and paramount safety of operation. |
| Designation | Note | Remarks |
|---|---|---|
| FLC 1012 | (spray) Heidelberg No. 00.580.5681 KBA Planeta No. L 082 0821 | Spray based on our lubricating concentrate LA1 offering good penetration, even into fittings. Guarantees AW-protection, best cleaning abilities and thus ensures grippers to be always in an operating condition. FLC 1012 absorbs very little dust. |
| FLC 4010 | (High-temperature-spray) KBA Planeta No. L 082 0860 | Synthetic high-temperature spray employed in UV-lacquering environment. Best results where good anti-corrosion and anti-wear properties are mandatory. |
| FLC 8010 | (UV-spray) | Synthetic oil spray for use under very intense UV-radiation. |
| FLC 3010 | (spray whith H1-approval) | This oil spray provides high class anti-wear and corrosion protection. It has superior creeping ability for joints and gaps. |
| FLC 9010 | (spray whith H1-approval) | Synthetic oil spray forming a slightly thicker film than FLC 3010. The product is suitable for use under UV-radiation |
| Designation | Note | Remarks |
|---|---|---|
| FLC 8 | spray | Due to high adhesion properties and outstanding lubricating qualities it is in use with curves and eccentric devices, where no automatic greasing by means of an automatic central greasing unit is offered (vide LA 8/LA 8 P/LA 8 H1) |
| FLC8 H1 | H1 spray | Due to high adhesion properties and outstanding lubricating qualities it is in use with curves and eccentric devices, where no automatic greasing by means of an automatic central greasing unit is offered (vide LA 8/LA 8 P/LA 8 H1) |
| Designation | Note | Remarks |
|---|---|---|
| FLC 700 | Forms an almost invisible non moistering/non dirt accepting both high adhesive slide film of silicone lubricant on paper and cardboard. The layer protects against moisture. Short evaporation after spraying is advantageous. | |
| FLC 710 | FLC 710 is similar to FLC 700, but much thinner and a less adhesive, lubricating film will remain. The advantage is the use during full production run. | |
| FLC 745 | with H1-approval | FLC 745 is a silicone lubricant with an H1 food-grade approval. Its consistency is between FLC 700 and FLC 710. |
| Designation | Note | Remarks |
|---|---|---|
| MBF 370 | with H1-approval | Conservation film easily applied with brush or rag. Prevents corrosion between printing plate and plate cylinder. MBF 370 can be removed with a carbon-dissolving agent. |
| Designation | ISO VG | Remarks |
|---|---|---|
| LFC 9046 | 46 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| LFC 9068 | 68 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| LFC 9100 | 100 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| LFC 9150 | 150 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| LFC 9220 | 220 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| LFC 9320 | 320 | PAO based, fully synthetic oil for temperature areas up to +150°C, (short term up to +180°C) These oils do not carbonize and are miscible with mineral oils. Because of the high oxidation resistance and the very good demulsibility and air release characteristics they can be very well used in piston and in screw compressors. Evaluation of oil should be done according to lubrication manuals of the individual machinery manufacturers. These oils posess an H1 food-grade approval. |
| GLS 962/N2 | manroland No. 80.94S40-0408 | Special high-temperature grease PAO-based and thickener (polyurea) to lubricate bearings of vacuum |
| Designation | Note | Remarks |
|---|---|---|
| GLS 75/N2 | (KP2K-20) KBA Planeta No. L 082 5440 | Lithium saponified EP-multi-purpose grease for lubrication of roller and slide bearings under medium and heavy loads in temperatures of -20°C to +120°C. |
| GLS 135/N2 | 2 (KP2K-20) Lithium based special grease | Short fibred and very homogeneous grease with special lithium soap, for the greasing of roller and slide bearings between medium and heavy work loads. This is suitable for central lubrication systems. |
| GLS 163 | manroland No. 8B.94S40-0390 | Very thixotropic polyurea grease for roller- and slide bearings with paramount feeding in central lubrication devices. Grease containers of central greasing devices must be filled free of bubbles and be equipped with a pressurized follower piston. GLS 163 is ideal for the gripper shaft lubrication. |
| GLS 363/N3 | (KP3K-20) (with H1-approval) | Grease for general lubrication of machines and open lubricating points. This grease is also suitable as sealing grease for ink ducts. |
| GLS 794/N2 | (with H1-approval) | Highly medium-resistant silicone grease for the sealing of ink ducts on KBA Planeta printing presses. |
| GLS 964/N2 | (KP2K-20) (with H1-approval) KBA Planeta No. L 082 5460 | Thixotropic polyurea type grease for roller- and slide bearings. Under normal lubrication the thixotropic characteristics will minimize spin-off of the grease. GLS 964/N2 is particularly recommended for lubrication of gripper shafts. |
| GLS 967/N1–2 | (with H1-approval) | This very adhesive grease with an elevated base oil viscosity is suitable for badly sealed bearings, such as curved roller bearings. |
| GLG 16/N00 and N000 | Semi-liquid grease for gears | Lithium saponified semi-liquid grease with outstanding sliding-friction behaviour and high load carrying abilities. This semi-liquid grease is approved for central lubrication devices. |
| GLS 37/N1 | manroland No. 80.94S40-0137 | Entirely synthetic special grease for bearings, gears and chains in UV-lacquering installations. Proved and recommended by Messrs. Billhöfer, Nürnberg. The grease is not water resistant. Not to be mixed with mineral oil type greases. |
| GLL 10/N2 and N1 | (KPF2K-20 and KPF1K-20) MoS2-grease | Lithium saponified multi-purpose grease with best adhesion properties for heavy loads in roller- and slide bearings as well as open lubricating points. Above a temperature of +60°C the adhesion quality will be reduced |
| VP 873 | (with H1-approval) | High-load and adhesive grease for anti-friction bearings, plain bearings, and open lubricating points. Appropriate for lubricating toothed segments. |
| VP 886 | (H1-grease for UV use) | The grease has been developed especially for the lubrication of gripper shafts under UV-influence. The grease has varnish dissolving properties. |
| VP 890 | H1-fluid grease | The grease has been developed especially for the lubrication of gripper shafts under UV-influence. The grease has varnish dissolving properties. |